This list is almost endless. Provided the product is non porous and can normally be immersed in water almost anything can be thoroughly cleaned. Jewellery especially gold, silver & platinum Watchstraps Coins and other collectibles PCB Boards etc Engine/Model parts Toothbrushes & Dentures Electrical components Make-up cases Diesel injection pumps Printer heads and toner cartridges Motorcycle radiators Vehicle differentials Milking parlour equipment Golf clubs&grips&golf balls Horse bits&stirrups &horse brasses Tattoo needles Sugical equipment Motorcycle engine crank cases Engine cylinder heads Turbochargers Bicycle derailleurs Ultrasonic cleaning is not recommended for the following gemstones: Opal, Pearl, Emerald, Tanzanite, Malachite, Turquoise, Lapis and Coral. DIGITAL ULTRASONIC CLEANER STRUTURE AND ACCESSORIES. Stainless steel housing, tank and lid.
Stamp tank without welding gap for better waterproof. Industrial grade IC & ultrasonic transducer.
Thank you for purchasing the ultrasonic cleaner. Please take the time to read these operating instructions before use and retain them for future reference. Failure to follow these instructions may lead to serious personal injury and damage to property. 1 DO NOT run the cleaner continuously for more than one hour at a time, as doing so can damage the internal components. 2 DO NOT operate the unit without fluid in the tank.
Always ensure the fluid is no higher than the max mark, Always ensure there is a minimum depth of 7cm. 3 DO NOT drop any item into the tank as this may cause damage to the transducer. Always place the items gently into the tank and use the basket whenever possible. 4 The more items that you place in your cleaning bath the less efficient it will clean. It is not advised to overlap items. Always allow plenty of clear space between the items.5 Do keep the lid on during use. This will prevent splashes and reduce evaporation of the fluid.
6 Never immerse the machine or power cord in water or other liquid. 7DO NOT touch the power plug with wet hands, especially when inserting or removing the plug.
8DO NOT touch the unit if the machine has fallen into water during operation. Remove the power plug from the socket first. 9DO NOT disassemble the machine, except by professionals.
10 UNPLUG the power source while filling or emptying the tank. 11 DO NOT spray water or liquid over the device and the control panel 12 DO NOT operate the cleaner without proper grounding. 13 DO NOT place the device on a soft surface, where the vents could be blocked. 14 Always turn the heater off after using as leaving it on can cause the fluid to evaporate and damage the internal components. 15 Upon completion of the cleaning cycle, turn the heater button off and isolate the machine from the electrical supply. 16 Take care when adding or removing items from the cleaning tank as the fluid is likely to be hot and displaced fluid can damage the internal components. Any displaced fluid must be dried up immediately. 17 In the event of failure/emergency, disconnect the mains supply by removing the plug from the mains socket. Fill stainless steel tank with liquid; Plug the cleaner into grounded outlet; After powing on, The temperature displays the actual enviroment temperature, LED displays 3 minutes, which is default time.Time setting: Press the TIME-/TIME+ shortly at a time means time increase/reduce 1min at a time, press and hold means time will increase/reduce by 1mins. The item "10L Ultrasonic Cleaner Cleaning Equipment Liter Heated With Timer Heater" is in sale since Thursday, January 21, 2021. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Ultrasonic Cleaners".
The seller is "factorymarket1891" and is located in Azusa, California. This item can be shipped to United States.